Made of high-quality materials, durable. The brakes are standard for ebike with 160mm discs and can also be used with 140/180/203mm discs, but require replacement adapters. There are cars with these three specifications.The installation method of the brake handle is split, which is very convenient for repairing or installing a new car, without disassembling other accessories. Scope of application: electric bicycle scooters and models of the same size. The process of brake handle is also very good, what you see is what you get, and there is a non-slip design above the rod. The important mounting sizes of brake calipers are standard 51 and 74, and it is recommended to measure and check. The brake handle can be installed on the handlebars of about 22mm, which can be used in standard models.
Caliper for left and right double cylinder design, force uniform, quick rebound. Product name: electric bicycle Kick scooter power off brake. Interface: 2PIN, 3pin, SM (options) Specification: 140/160/180/203 Material: Aluminum alloy Direction: left front right rear Scope of application: electric bicycle Kick scooter and models with the same size Length: 1350mm front, 2200mm rear Weight: about 900g/set. 1 power off pair brake.
The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please allow slight manual measurement deviation for the data. Also, the each additional item means.
The the same color and size. Transit time may be a little delayed because of the. If you have any questions.